Semiconductor Devices – A semiconductor material is a device that allows the passage of electric current through it. Consider the device CPU, it consists of many numbers of transistors within it and these transistors contain the semiconductor material which allows the passage of current and all these are controlled by a switch. Here is a transistor, the passage of electric current is controlled by the actions based on the state of the switch whether it is on or off. Hence, such a device, which allows the current to pass through them partially is called a Semiconductor Device.
Examples of Semiconductor Devices
These devices are said to be neither good insulators nor good conductors, hence the name ‘Semi Conductors’. The semiconductor examples include the following:
- op-amps
- resistors
- capacitors
- diodes
- transistors
These devices are widely used in many of the applications due to their reliability, compactness, low cost. As a discrete component, a semiconductor is used as optical sensors, power devices, light emitters, and also including the solid-state lasers. They also have a large range of current as well as voltage handling capacities, with the current ratings ranging from few nano-amperes i.e (10−9 ampere) up-to more than about 5,000 voltage and ampere ratings, which extend above 100,000 volts.
Semiconductor devices supply themselves in integrating into complex and are readily manufacturable into microelectronic circuits. They also find a good scope in the future in forming key components for the majority of electrical and electronic instruments and systems in various fields such as communications, data-processing, consumer, and also in industrial control equipment.
Types of Semiconductor Devices
These devices are classified accordingly whether they are two-terminal or three-terminal devices and sometimes for terminal devices. The examples of two-terminal devices include Diode, Zener diode, Laser diode, Schottky diode, Light-emitting diode (LED), Photocell, Phototransistor, Solar cell, etc.
Some examples of three-terminal semiconductor devices include Bipolar transistor, IGBT, Field-effect transistor, Silicon-controlled rectifier, TRIAC, Thyristor, etc.
Diode
A diode is a semiconductor device that comprises a single p-n junction. P-n junctions are usually formed by joining up of p-type and n-type semiconductor materials. This formation is due to the reason that the n-type region has a higher number of electron concentrations whereas the p-type region has a higher number of hole concentrations, hence, the electrons get diffused from the n-type region to the p-type region. Hence, this phenomenon is used in generating light.
Transistors
Transistors are of two types bipolar junction transistor and field-effect transistor. The bipolar junction transistor is achieved by the formation of two p-n junctions in two different configurations like n-p-n or p-n-p. In this type of transistor, the three regions formed are named as emitter, collector, and base or the middle region.
The field-effect transistor works on the principle of conductivity and the conductivity can be altered by the presence of an electric field.
Applications of Semiconductor Devices
- They are used in the designing of logic gates and digital circuits.
- These are used in microprocessors.
- They are also used in analog circuits such as oscillators and amplifiers.
- Used in high voltage applications.
0 Comments